The H-model inkjet module DN-JT056 is a four-channel inkjet marking unit mounted on the cutting tool holder, used to synchronously complete cut-piece numbering, registration marks, or QR code printing during the cutting process, eliminating the need for secondary manual labeling after unloading.
Core Advantages
- Four-channel inkjet channels integrates four printheads, capable of simultaneous or zone-based printing, with marking efficiency higher than single-channel solutions.
- Flexible marking content supports cut-piece numbering, registration marks, and QR codes, meeting different traceability granularity requirements.
- Synchronized with cutting path the inkjet action is triggered along the cutting path, with mark positions corresponding to cut pieces, reducing manual comparison.
- Convenient traceability management marks flow with cut pieces to the sewing stage, supporting full-process traceability from layout to finished product.
Applicable Materials and Industries
As a tool holder accessory, this module is suitable for cutting scenarios requiring cut-piece identification, such as automotive interiors, textile and apparel, and packaging printing. It can print on the surfaces of common flexible materials such as leather, fabric, and foam. Specific ink types and material compatibility need to be confirmed according to actual processes.
Selection Recommendations
When selecting, first confirm whether the tool holder interface of the existing equipment is compatible with this module, then evaluate whether the four-channel inkjet meets production capacity based on cut-piece dimensions and marking density. If only single numbering marks are required, the printhead quantity configuration can be evaluated; if QR code traceability is involved, it is recommended to first conduct material printing effect tests.
